Installing your Vent Cover
|
INSTALLATION OPTIONS
|
||
| Option ONE: AFFIX THE COLLAR ONTO THE VENT | ||
|
Fix the collar directly onto the border of the vent
|
POP ON THE COVER - MAGNETIC!
|
ONLY TAKES SECONDS
|
.JPG) |
 |
 |
| Option TWO: AFFIX THE COLLAR ONTO THE CEILING AROUND THE VENT | |||
| Step 1
Apply adhesive eg. SELLEY’S liquid nails fast dry to the inside edge of grey side of collar beside double sided tape |
Step 2
Smooth the adhesive flat with white scrapper (supplied) and peel backing paper from double sided tape. |
Step 3
Push collar up against ceiling ensuring you centre the collar evenly around the vent. |
Step 4
Press up onto the collar all around to ensure proper adhesion to the ceiling |
 |
 |
 |
 |
| Step 5
Apply a thin line of gap filler along all 4 edges between the collar and the vent edge. |
Step 6
Smooth the gap filler bead with your finger or a slightly dampened cloth. Remove plastic coating from the collar and then wipe collar agin with the damp cloth. |
Step 7
When the gap filler has dried (about 10 minutes) press the Vent Cover in place. |
The Vent Cover in place. |
 |
 |
 |
 |
Ventcovers have been providing an economical and effective cover to fit snugly over the Evaporative air conditioning outlet vents in the ceilings of your home.
The advantage of fitting Ventcovers , is to stop the heat escaping through these, outlets into the atmosphere, resulting in a significant reduction in heating costs, less air pollution. increased warmth and reduced draught in your home.
To enquire further contact 02 69 572215